Search:

Type: Posts; User: Forgetful Jedi Knight

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Hmm, that looks like a familiar design… ...

    Hmm, that looks like a familiar design…

    https://i.ibb.co/SP7fFYb/FFAB53-B9-D82-A-4-A7-B-A77-F-3-DD7-D615-D100.jpg

    To answer your questions,

    1. Correct on the IDs, I would have to check on...
  2. If I had to venture a guess, the third switch is...

    If I had to venture a guess, the third switch is to help reflash the board. The components on the board may just to help determine the final parts that the production board will require.

    Other...
  3. I received my prototype, and with a tad bit of...

    I received my prototype, and with a tad bit of sanding, it seems to be fine. I’ll mention it again to Tim about adding those (and a coupe, of other things I designed) to the store.
  4. Yes, however, I just recently gave Tim the...

    Yes, however, I just recently gave Tim the designs for those, so they’re being worked on. The CFX goes in the CFX disks, and the breakout board would need its own disks (which I’m awaiting the...
  5. Yes, you can skip versions. I would recommend...

    Yes, you can skip versions. I would recommend that you download the RICE version for the FW you’re planning to go to. I would also make sure you have the matching config package, as there are a lot...
  6. Replies
    3
    Views
    673

    Thanks. It’s sometimes nice to do hilts that...

    Thanks. It’s sometimes nice to do hilts that aren’t etched from end to end.
  7. I agree with Jay about the Y-connections....

    I agree with Jay about the Y-connections. However, I rarely ever try to attach two wires (say the positives) to a recharge port. I just attach one, and “y” off of that wire.
  8. Replies
    3
    Views
    673

    The “Evil Twin” Saber

    THE “EVIL TWIN” SABER


    I was approached at the beginning of July to do the saber pictured. If you’ve read any of the older EU books, you’ll know who the “evil twin” of Han and Leia was. The...
  9. Read through this thread: ...

    Read through this thread: http://forums.thecustomsabershop.com/showthread.php?11154-Commonly-used-Drill-bits-taps-and-measurements
  10. Ideally, you want to only remove the rear grip to...

    Ideally, you want to only remove the rear grip to either remove the battery ( if you’re using swappables) or access the SD card/USB port. That’s one (of many) reasons why placement of things like...
  11. Yes, the standard is that the resistor is ALWAYS...

    Yes, the standard is that the resistor is ALWAYS on the blade side.
  12. What Tim said. All my Neopixel builds are with...

    What Tim said. All my Neopixel builds are with the CFX. Feel free to check out the wiring video I did about 18 months ago on it. It’s in the video section.
  13. It depends on the color, but as Tim said, 30-45...

    It depends on the color, but as Tim said, 30-45 minutes would be the norm, depending on the color(s) you use.
  14. It realistically can be anywhere on the circuit....

    It realistically can be anywhere on the circuit. I’d examine where you currently have it, and find out why it’s breaking.
  15. Also, what kind of speaker are you using?

    Also, what kind of speaker are you using?
  16. Yes, however, it will take several hours to...

    Yes, however, it will take several hours to completely charge.
  17. I’ve got it Light Bringer.

    I’ve got it Light Bringer.
  18. Not likely. I would recommend you sign up to...

    Not likely. I would recommend you sign up to FX-Sabers and ask this question over there, at the board’s creator (Erv’ - Plecter Labs) has his troubleshooting section there.

    As for the colors, that...
  19. It’s highly recommended for ease of use.

    It’s highly recommended for ease of use.
  20. Where are you putting the recharge port? EDIT:...

    Where are you putting the recharge port?

    EDIT: I sent you a PM.
  21. What does this MHS saber look like?

    What does this MHS saber look like?
  22. This, with the JST attachment ...

    This, with the JST attachment

    https://www.thecustomsabershop.com/37V-148V-1Amp-Li-Ion-Smart-charger-P1180.aspx
  23. Replies
    11
    Views
    2,409

    Funny how that works out, huh?

    Funny how that works out, huh?
  24. Replies
    11
    Views
    2,409

    Well, look who’s back.

    Well, look who’s back.
  25. Replies
    2
    Views
    788

    Yes, I’m doing one now for a client, that has an...

    Yes, I’m doing one now for a client, that has an “exposed” OLED screen (NOT using the mount you have shown). And they have been done before, VV was one of the first major players to incorporate them...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4