Problem solved. Changed the color space from 3 to 4. Solved all issues.
Type: Posts; User: Jacobpac
Problem solved. Changed the color space from 3 to 4. Solved all issues.
The led strips that worked were from TCSS. I’ve checked the wiring in the blade and it’s correct with resistor.
My thought is that it is the timing too and I’ve been playing with it. No luck. I’ve...
Crystal focus 10
I bought some LED strips from amazon because TCSS was out of inventory. Here are the details
Sk6812 RGNNW
PCB IP30
It lights up but all colors light up. This doesn’t change when using R.I.C.E....
Ok, cool! Thx!
I have a neopixel blade and a CF v10. Im trying to achieve a flame effect and also one in which there is a scrolling white LED along the full length of the blade.
Anyone have experience with...
Another update. The nano does not shut off when the blade is not connected. I tried decreasing the current (900 main and 200 on Foc)-still shuts off on hard swing. I tried a higher amp battery and i...
I don’t know. I’ll try disconnecting the blade and swinging it this evening. I’ll keep you up to date
Every nano I’ve had has had similar issues. I’ve used hilt LEDs in past and they would cut off...
update: Ive tried decreasing Foc mix to 500/500, and Im running Main at 900. battery is fully charged and no scratchy speaker. I've tried changing orientation of board. The result is the same. gentle...
Battery is fully charged. No scratchy speaker. Its when I swing down and to the left. I tried decreasing the power draw by dropping the current from 1023 to 950. Still the same. I might try changing...
Im running a neopixelstripx2 140 with TCss 10A 3.7v battery and the nano V4. Everything works perfect.... Until I swing. Not every swing however. Could it be the power consumption? Im running it...
Thank you for your response. I cut off some of the length. I’m running 2 strings of 135. I’m going to try larger wire then a different battery. I’ll keep you posted
Thank you for the responses. I’ll try larger wires first. Then a different battery.
I currently do not have a way to test the battery.
I need help. I have 2 strings of 144LED neopixel strips connected to prizm5.1. On certain colors it gets very distorted sound (orange, purple etc) green and blue haven’t caused any problems. I’ve...
I’m using 1.2 ohm 2w resistor on each led. No chassis
Help needed. My nbv3 cuts off when struck lightly (during foc). Any fixes?
Anyone have an approximate run time for the Panasonic 18650 3.7v 10 battery for a neo pixel blade?
Thank you!
I need opinions. I'm looking to achieve a light blue.
Things I've considered: simple blue led, enhanced blue blade and blue led, mix of blue and white...?
I need suggestions on how to color mix a bright sky blue or electric blue. Have any of you used The enhanced colored blade yet? What is the best use of those kind of blades?
It's been while since I've been on here. I like a white led illuminating a purple blade -double wrap Corbin show blade- it makes the best purple I've been able to achieve even with mixing using the...
thank you for the replies!
Ive never worked with it. Does it require 2 momentary switches to switch between profiles or sounds?
I need some suggested settings . Mine are all off. I've been playing around with it and I'm making it worse.
Currently my settings are:
Gate 106
Clash 455
Swing 76
Spinfx 76
Stabfx 449
...