Search:

Yeah, it's charged.
When I completely removed the crystal chamber led it started acting better. It will turn on and run like normal but none of the aux switch features work.
I'm stumped. I have...

I'm wiring up a prizm 5.1 with a tri-cree rgb led, charge port, rice plug, crystal chamber RGB led.

It boots properly with sound but a red led comes on and stays on at the crystal chamber, and so...

There is a new lightsaber company from Singapore that has computer, wall, car and battery backup charging capabilities. I know it's not allowed to discuss other companies so I won't link to them or...

Please keep up posted. I'm very interested in this.

I've also used 2 of the old rebel star heat sink shims with thermal tape and glued the lens in place. It worked alright but I'm afraid it will come apart.
I think I'll shoot Tim a PM about cutting...

Does anyone know how to get the tri-cree or tri-rebel led's to fit with the old style blade holders?
The lenses are too short to work with the old style heatsinks and the standard led modules...

I'm also interested in this.
Also interested in using the portable charging packs used for cell phones.
This would come in handy during conventions or longer events.

Does anyone use an alternative to the VV dust caps?
I'm looking for a similar cap to keep things from falling in the blade but also something low profile to help me grab the blade when I pull it...

Oh dang this kind of threw me.
I recently wired my tri-cree similarly. 2 Rb's and 1 white in parallel through a NB3.0 board, 3.7v power source. I used 1 ohm 2w resistors on the negatives of each led...

I've recently started upgrading my old sabers to tri-cree and tri-rebel led's.
The standard LED modules will not fit in the old style blade holders. The optics for the tri-led's are shorter than the...

Were you ever able to find any info on number 1? I have old style MHS parts and I need to add the tri-cree led.

Thanks for the tip!
I checked it and it was around 940ma and the max rating is 1 amp for that led. So I moved it to 1000 and it's a tad brighter, but not as bright as I'd like.
I had turned off the...

I've had a Rebel Cyan LED in an economy setup with a single 3.7v 18650 battery. It has always been exceptionally bright.

I recently paired that led with a Prizm board and it's now very dim.

I'm...

I believe there are primarily 2 kinds of Sith. There are the more aggressive, warrior types. This would be your Darth Maul type characters who set out to intimidate you (though the Clone Wars shows...

Those are also very expensive.
Some of the amps on the Mercs site have ports for ipods and microphones. There are some relatively cheap cell phone voice changers on ebay that MIGHT work with those....

Just what they said. There is a new style heat sink and, while it needs the new style blade holder, it still works with the old / standard bodies and parts.

I've tried the new red rebel's (deep...

Not really sure what you mean by pics of ideas.
There's a few subforums that are reserved for pictures of your saber and WIP pics.
Plus there's the MHS builder. It doesn't get much easier than...

I have built 3 sabers and I'm working on a 4th now. I own one MR but I'm not sure if that counts.

I've been thinking about taking a crack at this saber too, but I have a few nitpicks. First, it's Darth Malgus' saber, not Angal. And I think you mean Darth Angral:...

You need this.
Hilt style 3 with guarded style switch hole
MHS ribbed extension v-grooved
MPS Pommel style 3 v2
Screw on LED blade holder style 4
(MAKE SURE YOU HAVE CLICKED TO INCLUDE THE...

I think you'll only really need one switch and one MPS clip. Depending on what soundboard you're using will depend on what switch you need.
The speaker and battery holder combo is fine. It can...

You need to make sure you get the guarded momentary switch to fit the hole. FYI you'll also be paying for 2 switches (one with the P4 kit and one seperately). You might consider skipping the kit...

I know one! How about when you shoot someone directly in the chest in Duke Nukem Forever and it passes through them like nothing happened, then they jump on you and kill you?
Wait, that's not odd. ...

I replaced the swing and it's a pretty drastic change. And it saves a lot of space, too. You can just clip off the bulky hasbro sensor and solder the new sensor to those wires. You can also solder...

Here's my first attempt at a Jedi.
He's modeled after me and my Jedi costume and is actually a pretty close resemblance.
http://i958.photobucket.com/albums/ae69/GiantSlor/Jedi01.jpg