Call me crazy...but what does "BATT- - negative pad for LEDs, needs to be at same level as GND when both are connected". I am using the Proffieboard V2.2. Does that mean the Proffieboard has to be flat? For motion I'm guessing.
Printable View
Call me crazy...but what does "BATT- - negative pad for LEDs, needs to be at same level as GND when both are connected". I am using the Proffieboard V2.2. Does that mean the Proffieboard has to be flat? For motion I'm guessing.
That board isn’t sold here at TCSS, so I don’t believe that you’re going to find many, of any people here who will be able to really help you out.
I'm not sure what this refers to out of context, or what you think is wrong with this. In general bat- and gnd are almost always treated as equivalent. If you had something out of range on an external supply it could push the things out of spec.
Where did you get this from? Battery Negative Pad and GND are bridged on Proffie 2.2. They are both common. Neopixel negative goes to the fets. Not sure what your question means. I have installed a Proffie or two.Quote:
Originally Posted by devvlok
Tom