yep i have 7F installed on my sd card, my issue now is, i have it wired up for final assembly, and the NPXL conncter is only lighting up red, and it won't light up the blade :(
Printable View
The battery definitely sounds like it was empty.
Either you have it wired wrong, OR you have a short somewhere.
Found out the LS6 board has a short. But I have a backup board. I’m assuming I killed the battery from charging it too long. Have another battery on the way. I’m probably going to take a break for a few days to avoid pulling any hair out trying to find the issue.
The new battery showed up and I took a break from the electronics to cut out my crystal chamber. But even with the new battery the blade won’t light up, and the the neopixel connector still only lights up red, no animations, no color change, just a static red, and now I’m completely lost on how to get it to work.
Sounds like it could be a configuration issue. You would have to post your config.txt file.
//CF-X Configuration - FOR LEDSTRIPS
debug=0
logport=0
vol=50
menuvol=50
menugest=0
trackgest=0
fontgest=0
beep=40
muteb=0
muteoff=0
sleep=300000
deep=50000
qkignite=0
orient=0
valsnd=0
switch=2
offp=0
offd=200
onp=0
ond=20
swing_flow=360
clash_flow=300
spin_flow=400
smooth_flow=1000
lockup=300
loop=1
shuffle=2
plilh=3400,4200
omnisense=2000
masterpower=100
ledstrip=133
auxstrip=0
tridentstrip=0
accentstrip=0
dragstrip=20
strippower=1111
ls1_timings=350,700,24,1,3,0
ls2_timings=350,700,24,1,3,0
## Motion Settings
gate=50
smooth_gate=50
hclash=850
hswing=450
hslash=400
hhybrid=550
hforce=300
hfclash=650
hstab=500,-20,20
hspin=750
htwist=350
hdrag=500,-90,0
htemp=75
spectrum_mode=3
spectrum_axis=1
field=10,10,10
[profile=0]
pname=standard_profile
wakeup=1
randc=0
blastp=0
random=2
pom=0
pof=0,45,90
twon=0,-90,-45
twoff=0,-90,-45
wagon=0,-90,-45
wagoff=0,-90,-45
swon=0
poi=2
magic=0
saberlock=0
blastm=0
randb=2
shmrd=150
shmrp=12
shmrr=24
shmr%=60,99
focd=200
focp=20
focr=28
foc%=60,99
focl=1
focb=1
focf1=1
focf2=1
focf3=0
fade=0
flks=6
flkd=25
tridentflk=0
flkon=1
flkoff=1
pulsed=0
pulsel=0
on_fade=1
off_fade=1
unstable=0
style_pon=0
style_poff=0
style_preon=0
style_postoff=0
style_blaster=2
style_lockup=1
style_drag=2
style_flicker=0
style_sbright=0
style_accents=0
style_pixies=-1
style_grafx1=-1
style_grafx2=-1
style_grafx3=-1
style_clash=1
style_stab=0
over_pon=0
over_poff=0
pos_lockup=60
size_lockup=40
mapping_color=0
mapping_unstable=1
mapping_lockup=1
mapping_drag=1
mapping_flicker=0
mapping_sbright=0
mapping_move=80,310
mapping_audio=8000,24000
size_flicker=0
pos_flicker=0
force_flicker=127
depth_flicker=127
hcool=70
lcool=0
sparkf=120
sparkd=10
drift=1
mapb=100
mapc=70
refreshfx=12
bladepower=100
omnisabers=0
sbolt=8,20
dbolt=40,810
lbolt=15,30
fbolt=1
rbolt=10
qbolt=50
## [profile=1]
## [profile=2]
## [profile=3]
## [profile=4]
## [profile=5]
This is my config file, after I already tried formatting the sd card and reinstalling the base package