Ah my saber i hope i will have in production soon.
http://www.freeimagehosting.net/uploads/63dcdb379e.png
Printable View
Ah my saber i hope i will have in production soon.
http://www.freeimagehosting.net/uploads/63dcdb379e.png
My saber Anorthic which will utilize, lee filters, a P4, and hasbro sound.
http://i540.photobucket.com/albums/g...-/Anorthic.jpg
Well I know i've not finished my first saber yet but this is going to be my next one, all you have to do is imagine the rubber O-ring area to be curved and that’s what it should look like. All ready got the curved pipe really and cut :D.
http://img210.imageshack.us/img210/6...rve2qs4.th.pnghttp://img210.imageshack.us/images/thpix.gif
P.S opps also need to ask Tim if he would mind makeing me a custom blade holder too ;D
A double saber that would be based of if a 1.25 sink tube and hardware stuff would be put on top. will be my brothers once I get around to it, that is after I build my saber and my cousin's.
http://i540.photobucket.com/albums/g...oublesaber.jpg
Well, after the Crystal Focus fiasco of mine a few months back, I decided that while that particular saber is going to go back to the drawing board a bit. My current projects, one for me, one for my brother, are less ambitious. The internals are going to be pretty well identical: 4.8v 2600 mAh batteries from TCSS through recharge ports, running US2 boards and K2s. My blade will be green, his will be blue. Mine uses a D-ring, since I have the grips on there and I don't feel like trying to replace them. No powdercoating, extra LEDs, clash lights, crystal chambers, or anything else on either of them, too. Keeping a sense of simplicity with these. (That and I'd actually like to build something that, y'know, works, before I start getting all fancy.) :rolleyes:
Mine:
http://img215.imageshack.us/img215/5716/jimsaberki2.png
His:
http://img88.imageshack.us/img88/1030/gregsaberrx0.png
A 1.5 sinktube/hardware saber for my cousin. it is currently in progress and will use a pex blade, p4, and some hasbro sound board.
http://i540.photobucket.com/albums/g...anielsaber.jpg
Concept for my "bells and whistles" saber. Once I get my hands on the body, I'll be able to judge better what can fit, but currently I'm thinking either another US2 board, with 14500s in the 4 AA holder or a custom double 18650 pack, Lux 5 cyan from luxeonstar.com, and, with the room in the new version of pommel 3, I think I can fit a recharge port in there.
I might replace the guarded switch with a regular pushbutton, add a long-shank tactile switch right below it, and that would let me drop in the wounded CF3 I have - the more I look at it, the more I think it'll still work. (If, by some miracle, I score a CF4, then it's a done deal.) At that point, I might get real fancy and drop in a main power 5mm LED and "recharge me, dummy!" 5 mm LED. That'll probably require using the 18650s, though.
The emitter and choke point in copper with clearcoat, the ribbed section in gloss black with yellow O-rings, the hilt and pommel in chrome with clearcoat, and the brass Covertec button.
http://img222.imageshack.us/img222/8...xtsaberji2.png
I call this one the Armistice Ataraxia, for a Consular-type character during the Clone Wars. Built with the thankfully revamped MHS builder. Eventually will run a Luxeon III Green LED on 4 AA's.
Wish I could build all of these, but if someone gets a little inspiration have at em.
http://i182.photobucket.com/albums/x...ollinsMHS2.jpg
http://i182.photobucket.com/albums/x...ErDanGill4.jpg
http://i182.photobucket.com/albums/x...nGillstunt.jpg
http://i182.photobucket.com/albums/x...ennssaber1.jpg
http://i182.photobucket.com/albums/x...rodssaber3.jpg
http://i182.photobucket.com/albums/x...odssaber21.jpg
http://i182.photobucket.com/albums/x...sithsaber2.jpg
http://i182.photobucket.com/albums/x...arleysaber.jpg
Here are some sabers I really wouldn't mind having:
http://i35.tinypic.com/6yjxav.jpg