I have had a Larbel Obi-Wan TPM converted over to EL,
is it possible to convert my spare Larbel Obi-Wan TPM into an LED version and possibly stick a sound board from an FX into it?
I guess I should try taking apart the Larbel and see.
Printable View
I have had a Larbel Obi-Wan TPM converted over to EL,
is it possible to convert my spare Larbel Obi-Wan TPM into an LED version and possibly stick a sound board from an FX into it?
I guess I should try taking apart the Larbel and see.
Its possible to do allot of things..but unless someone has done one before its hard to say how easy it will be.
Tim
The Custom Saber Shop
The problem here is battery room.
If a Luxeon can run on a 9volt then you could convert it though the fit
will be very tight.
As far as a MR sound board, it might fit but again...
getting enought power from a 9volt to get it all to fit in there.
Or maybe a custom Litium battery for fitting this narrow hilt, but the
top shold have room to fit, a very "custom" time consuming set up.
a 9 volt battery can be used for any voltage requirement bellow that with the appropriate Zener Diode. Look into it.
Born of Sith, seduced by the light.
http://www.saloncatalina.com/images/signature.jpg