-
Parts List
I am hoping to order these parts sometime. Have any powder coating ideas?
HILT:
7" Fluted with standard style switch hole
MHS choke style 1
Screw on LED blade holder style 10
MPS Pommel style 4
8-32 x 1/8" Set screw (blade retention)
MPS Clip
MPS Insert style 9
Electronics:
Build Your Own Luxeon III Electronics Kit (red)
Cheapy Hasbro Sound.
Did i miss anything?
EDIT:
here is the picture with powder coating:
http://s794.photobucket.com/albums/y...rent=saber.png
-
make sure the switch you chose is compatible with the soundboard. You should need a momentary with the cheapy boards.
-
Thanks
OK. i buy one at the shack
-
Why buy one at RadioShack? Just add one to your order. If you buy one somewhere else, you can't guarantee that it'll fit in the switch hole properly.
-
ok
-
And will you drill and tap your BR screw hole yourself? If you do you will need to buy a tap if you don't have one already.
Do you have a speaker? The premium speakers in the store will improve the sound quality.
I suggest you buy a few quick disconnects or JST connectors. Put one on your LED so you can change it between any other future sabers.
For PC I would get:
Main body: DFS2
Choke: CH13
Pommel: PM41
In a black color.
-
Thanks
Thanks for the advice. I will buy the speaker and the quick connects. I have a tap kit. Ill look into the colors. Its suppose to be a sith saber.