-
2 Attachment(s)
I have worked on some more little details today.
For a long time, I had the idea of putting a circle like spring inside the last groove of the ribbed section as some sort of vent in the area where the Graflex Clamp goes. I have since looked for a spring that might fit and found one today.
Still needs a bit of tweaking but I like the detail.
Cheers,
Lilac
Attachment 15721 Attachment 15722
-
4 Attachment(s)
Activation switch done! This was huge to me because it required to most amount of work (meaning filing, sanding and drilling) on the hilt itself. I am not too familiar with that kind of work.
I will try to drill into the switch button to fit a very small screw or something as a button. I don't really like how it looks now.
Next up is electronics and some little details.
Cheers guys!
Attachment 15731 Attachment 15732 Attachment 15733 Attachment 15734
-
For the switch, check out darth_chasm's tutorial for a great, simple way to add a brass cap to the switch. Would work perfectly with your setup there.
http://forums.thecustomsabershop.com...m+brass+switch
-
Amazing, thanks!
If only the Fotos were still online...