-
sure.
1. Download default NB V2 SD card setup from Plecter Labs
2. Make sure you unzip it and have it on your desktop.
3. After you're sure you have it, delete the files on the SD card
4. Drag the files from the download into the blank SD card
5. Put the SD Card Back in and you're done!
This worked for me... be sure to back up your SD card :)
Hope this helped :D
Link: http://www.plecterlabs.com/catalog/a...rticles_id=107
The thing you have to click is:
► Original archive - Nano Biscotte 2.x - Light Meat + Dark Meat + Configuration File)
-
1 Attachment(s)
okay! I'm back with a few questions!
so my wiring works and I'm very pleased with it! Thanks for all of the helpful advice to y'all!
So I have designed a chassis based on previous advice.
The picture is attached. Please tell me if ANY ideas are better. I am just throwing ideas around ;3
Here's the plan:
Attachment 10595
Here's my parts list:
http://www.thecustomsabershop.com/Ac...k-S3-P813.aspx
http://www.thecustomsabershop.com/St...read-P770.aspx
http://www.thecustomsabershop.com/2-...acer-P785.aspx
-
That's the typical way to build a chassis with the parts here in the store. Don't forget the 4-40 hex nuts to hold everything together.
Depending on how far you slide the chassis discs, you may need to modify the one nearest the wiring harness. The harness won't fit through the slot without modifying the chassis disc.
-
Thanks! I was only planning to slide the second chassis up to the harness, not slide over it ;)
Thanks for the missing part, too!