Cardcollector Presents "Thunderbolt"
Hey Folks,
This saber was commissioned via email for a birthday gift. I was not given a design, and came with one based off the request it be "Sleek, Agile, and strong". A Blue LED was also specified. A strict budget was important in this build as well, so to the drawing board I went.
So after a few days we settled on this design. (render courtesy of Rafelma Rendering services)
https://lh4.googleusercontent.com/-H...3%252529-1.jpg
This build was one of the easier builds for CCS, because of the minimal shroud work and the stunt saber electronics. However, just because a saber is simple, doesn't mean it should lack in quality. This saber is constructed using 100% TCSS MHS parts, Sinktube, and grip material. A polishing service was also added by myself for no extra fee because I am rather partial to this design. ;)
So, Official Specs.
Hilt;
- 100% TCSS MHS parts
- 1.5" Chrome sinktube
- TCSS grip material
- Pipe cutter grips
- CCS Polishing service
Electronics;
- 4aaa Alkaline Battery pack
- Latching Guarded switch
- 2.2ohm 5 watt resistor
- Seoul P4 Blue with 10 degree lens running at 1000ma-1200ma
Video; http://www.youtube.com/watch?v=rv7WYRgEroE
And Glam pics;
https://lh5.googleusercontent.com/-y...nderbolt03.jpg
https://lh5.googleusercontent.com/-m...nderbolt04.jpg
https://lh6.googleusercontent.com/-j...nderbolt05.jpg
https://lh4.googleusercontent.com/-N...nderbolt06.jpg
https://lh6.googleusercontent.com/-P...nderbolt07.jpg
https://lh4.googleusercontent.com/-u...nderbolt08.jpg
That's it guys, if you have any questions just let me know.