Printable View
I'm building my second saber. First saber I built was Korbanth Ls6 with NBv4. This current one, I have everything wired up. The BBW cree is not lighting up.
Is there something I need to change in the config file for the Cree to light up? I have blue 1 (L1) Blue 2 (L2) and white to (L3). I may have to wire white to (L4) for FOC?
Thanks in advance
No you don’t have to wire th FoC to L4. What firmware version are you running (if you know). If not, please post the contents of your main configuration file.
FW v10. 004d - is a 1-02-2020
FW v10. 004d - is a 1-02-2020
I'm getting all sound fx. I can scroll thru the menu and change sound fonts.
I need the config from the root directory. The strippower= line specifically.
Would I download Docklight. de to be able to access root directory? I'm using a PC
Hey tw0leftskis
There is a ledstrip value in the “config” file. That’s what we need; no fancy program needed just open with your notepad application.
- Steve
No, you don’t need anything special. You should be able to open it with notepad, just like what you showed me, only I need to see the WHOLE file. Not just snippets.Quote:
Originally Posted by tw0leftskis
I didn't realize there were more files to the config
led strip=0
Can you verify that your battery is charged, resistors are correctly sized, and that your LED does in fact work?
- Steve