Couple of updates:
Finally finished the Darth Ryo all in one MHS chassis. I went with gold and brass colors to try and create a partially rusted looking inner core:
https://image.ibb.co/b3dzhk/IMG_20170620_223643.jpg
https://image.ibb.co/f13X2k/IMG_20170620_223700.jpg
https://image.ibb.co/npEGTQ/IMG_20170620_223711.jpg
https://image.ibb.co/hnrkNk/IMG_20170618_062613.jpg
https://image.ibb.co/ieEGTQ/IMG_20170618_062700.jpg
https://image.ibb.co/iGGVoQ/IMG_20170618_062722.jpg
https://image.ibb.co/dFaehk/IMG_20170618_062727.jpg
Vandal switch with red LED and the TCSS switch 20 are wired up and attached to the activation box:
https://image.ibb.co/hnXQNk/IMG_20170620_223836.jpg
https://image.ibb.co/mugwTQ/IMG_20170620_223844.jpg
Custom blade plug:
https://image.ibb.co/htss2k/IMG_20170620_224028.jpg
https://image.ibb.co/ndaC2k/IMG_20170620_224041.jpg
I'm hoping to get some advice on the following:
https://image.ibb.co/g3UuF5/IMG_20170620_224050.jpg
https://image.ibb.co/mv9uF5/IMG_20170620_224057.jpg
I'd like to use either replica graflex button or the replica glass eye as a blade retention screw, but I don't want them to protrude out of the blade holder like you see in the pictures above. How can I go about using them as blade retention screws, while having them be flush on the blade holder? I hope I'm making sense. More updates tomorrow.
Thanks.