Parts Check

Hi! I'm Grey, I'm pretty new to the saber community.

After taking costs and such into account, I've decided that my first saber will be a CFX/Neopixel custom build. If anyone would like to just double-check the parts I have listed below to make sure I'm not missing anything, it would help a ton. Other than wires, a chassis, and a blade, here is the complete list:

-- CFX
-- US Dark Initiate V5 (empty)

TCSS PARTS
-- Pre-Soldered Pixel PCB Hilt side connecter and 7 pins
-- MWS Standard Style Momentary Switch
-- MWS Long Latching 16mm AV switch
-- MWS Panasonic Li-Ion 18650 3.7V 3400mAh PCB
-- MWS Recharge Port
-- 2W 28mm Bass Speaker

Side Question: For CFX/Neopixel sabers, should I be using 2 momentary switches, 2 latching switches, or one of each? Haven't really been able to find anything that answers this in the forums. Any help with this is appreciated.

You need one of the 15A batteries for a pixel blade. the 3400mah cell will not work.

It's momentary switches. Read the manual for the board.