Anakin rots conversion

I was disassembling my 2005 master replicas anakin rots and the one in the tutorial was different than mine. The difference was that the blade on mine had a quick disconnect between the hilt and blade I know I saw someone post about this before but I can't seem to find it. Im just wondering how to remove the clash sensor from the quick disconnect. Any help would be most appreciated.

You will have to de-solder it from the pcb that the din plug is attached to. Once you have the sensor off, re-solder it to the bottom pins on the soundboard.

Do you have a picture or diagram of which part is the actual sensor?