Neopixel Ignition Speed

I just recently finished my first saber using the NBV4 and now I'm messing with settings to try and make it perfect. The #1 thing I am having trouble getting to work is the ignition speed. I've messed with the qon/qoff speeds and that doesn't seem to do anything. I saw this video https://www.youtube.com/watch?v=iz4nuRYLkYM and he gets the blade to do what I would like. Any thoughts? I'll post my current settings down below.

//Nano Biscotte 4.0
drive=500,0,1000
fdrive=1023,0,1023
focmix=101
resume=0
shmrd=210
shmrp=6
shmrr=13
shmr%=0,50
focd=200
focp=10
focr=10
foc%=0,80
qon=0
qoff=0
flks=3
flkd=20
pulsed=0
pulsel=0
lsfadeon=0
lsfadeoff=0
lightstick=0
omnisabers=0

Is this a config file from one of the banks or the override file?

It's for one of the banks

See if there is a won and off in the override.txt file. If there is, either modify those, or remove the lines completely if you want different speeds per bank.

There is not a won file in the override. Here's the override settings.

## Override File
vol=4
beep=40
rebootd=1250
motg=500
muteoff=0
gate=30
hclash=700
hswing=220
offd=200
swing=200
clash=150
deep=15000
ledstrip=130
ls0=14
ls1=28

So I figured it out. My problem was assuming on a scale of 0-3000 that 1500 was a good starting point. The speed I was looking for was around 150 so i wasnt seeing any changes when i edited the qon

Hi there! you said 150 but was the qon or qoff or both? what numbers did you end up using for both?