Ok I am using speaker holder 5 and am trying to figure out how the heck I get the wires for the recharge port past it. I can't seem to come up with a solution that sounds doable. Please help.
Printable View
Ok I am using speaker holder 5 and am trying to figure out how the heck I get the wires for the recharge port past it. I can't seem to come up with a solution that sounds doable. Please help.
How about channels? I know the pic below is a V4 holder but I would think the same idea would work for the V5.
http://i12.photobucket.com/albums/a2...psjdsoy9cc.jpg
Cut a small channel along the outside of the speaker mount. You'll be able to route fine gauge wires past the speaker that way.
Edit: DC beat me to the punch, and used pictures.
DC do those go all the way thru the holder or are they just deep enough for the wire?
Ok last 2 questions. What did you use to make the groove? And what guage wire would you recomend?
28 gauge wire if available, but nothing larger than 26 gauge. You can use just about anything to cut it, but a dremel or file is probably easiest. Just cut the channel wide enough and deep enough for the wires to slip past.
Thanks everyone for your help
If you are wary of using a Dremel, a small file will do the trick. It'll take a lot longer, but you'll also have a great deal more control over how it turns out.