2 Attachment(s)
Crystal chamber for new saber project
Hi everyone.
I recently started making a new lightsaber. At this moment crystal chamber is ready, and now i want to share some details of my work.
Materials used:
parts of the head from an old VCR, brass rods 3 mm, steel rods 4 mm, washers 25 mm and 16 mm, threaded brass and steel standoffs, various screws, rgb led 5 mm, quartz crystal.
All the details were processed using a drill, needle files, Dremel and abrasive wheel.
Attachment 14278Attachment 14279
https://www.youtube.com/watch?v=lwQp-oBkzaY
Thanks for watching.