Switch problem on the Hasbro econo board. Help!
Morning all!
I recently got hold of a Luke Skywalker lightsaber on ebay. Pulled it apart, found everything pretty much as described on the tutorials, so I was pretty happy. Until I discovered that the momentary switch is built onto the board itself, along with one of the sensors (swing, I think, though I really don't care, since I wasn't going to move it anyway).
So I was wondering if anyone has a solution for either removing the switch (preferable, since I want to put in a better one), or installing a switch cover onto the hilt so it works. I was planning on using part of the blade tube as a sleeve for the card, so I guess any solution would have to take that into consideration.
Here are some pictures of the card in question. I'm not sure what year it was, since it was an ebay purchase and not in the original packaging. Sorry for the poor quality; I was using my phone to take the pictures.
[IMG]<a href="http://s296.photobucket.com/user/FencerScott/media/temporary_zpsi3m63lsq.jpg.html" target="_blank"><img src="http://i296.photobucket.com/albums/mm200/FencerScott/temporary_zpsi3m63lsq.jpg" border="0" alt=" photo temporary_zpsi3m63lsq.jpg"/></a>[/IMG]
[IMG]<a href="http://s296.photobucket.com/user/FencerScott/media/temporary_zpsl67sppep.jpg.html" target="_blank"><img src="http://i296.photobucket.com/albums/mm200/FencerScott/temporary_zpsl67sppep.jpg" border="0" alt=" photo temporary_zpsl67sppep.jpg"/></a>[/IMG]
Thanks for any and all help!
Fencer Scott
