-
1 Attachment(s)
Is this a viable option?
Attachment 13515
The switches would be sliding switches and I would never activate both at the same time. Would this setup be safe?
I just did a stunt saber with three different colors and what I took away from that experience is that I absolutely hate JST connectors.
For Clarification:
Slide switches
R/rB/W Tri-Cree
3.7v 2400mAh Trustfire Battery.
-
Activating both switches at the same time should be safe enough. You'll just get shorter run time from the battery because you'll be using more juice.
If you use a momentary switch for the white LED, it will only light up when you hold the switch down. Sort of a pseudo flash on clash. Flash on Mash?
-
Haha thank you, Generic, for the input and for the humor. I think I'll actually do that. I'm doing this for the Ascend that I have and since Rob makes them with the second hole for a momentary that would just be easiest. Filing/"Dremeling" out a slot to fit a slide switch in there would be a gigantic pain in the butt.