I've wired up a few NBv4's and never run into this problem. Everything's working great except there's no flash-on-clash. Any common reason for this?
Printable View
I've wired up a few NBv4's and never run into this problem. Everything's working great except there's no flash-on-clash. Any common reason for this?
Have you checked through the configurations to make sure you have everything set properly?
Yes - it's the same as I've used before (with a different color in each bank):
//Nano Biscotte 4.0
drive=1023,0,0
fdrive=1023,1023,1023
focmix=001
resume=0
shmrd=210
shmrp=6
shmrr=13
shmr%=0,50
focd=200
focp=10
focr=10
foc%=0,80
qon=0
qoff=0
flks=3
flkd=20
pulsed=0
pulsel=0
lsfadeon=0
lsfadeoff=0
lightstick=0
omnisabers=0
I've got no motion-sounds - no clash - nuttin. Are there other configurations I should be looking at?
No. Please take a good, high quality, closeup of the top of your NB board. It sounds like a component may have possibly sheared off.
Thats very fuzzy. Any way to take a clearer picture, and a little closer?
Yeah, sorry - here it is:
Attachment 17243
Also, can you do the underside of the board?
Here you go, Dr. Let me know when to turn my head and cough. :D
Attachment 17252
Ha ha. I don’t see any apparent hardware issues. I’ll ask Zook to take a quick look. I’ll take a look at your config later when I get a chance to sit down and concentrate, unless someone else beats me to it.