THIS MAY BE A DUM, ANSWERED EASILY QUESTION BUT WHAT KEEPS THE BLADE IN THE HILT. I UNDERSTAND HOW THE FEMALE END OF THE MONO PLUG SATYS IN, BUT IS THE MALE END SCREWED INTO THE EMITTER AS WELL?
Printable View
THIS MAY BE A DUM, ANSWERED EASILY QUESTION BUT WHAT KEEPS THE BLADE IN THE HILT. I UNDERSTAND HOW THE FEMALE END OF THE MONO PLUG SATYS IN, BUT IS THE MALE END SCREWED INTO THE EMITTER AS WELL?
It is held in place by a set screw or thumb screw
Tim
The Custom Saber Shop
Any plans on makeing a Graflex red button or glass eye blade screw? Or any idea on how to find or make one.
Tim's blade holder works in the Graflex. I imagine the top part itself which is meant to hold the lightbulb would do okay for holding the blade in. You might want to ask a member who has done this. LAN-ED-TUL has done it with an LED. So I assume it could be done with EL too.
<center>http://www.dewbackwing.com/dewbacks/...inupbanner.jpg
www.dewbackwing.com</center>
i am making a red button thumbscrew by using a big hex head screw, the red plastic thing from a pushbutton switch and a phillips head screw. also, does anyone know the diameter of the redbutton on a real graflex? i can post pictures of any of this stuff if someone doesn't understand.
i am a nerd, if you don't like it, i will cut you with my lightsaber
My EL graflex holders should be here any day now.
Tim
The Custom Saber Shop
So these are going to be like your normal holders but have the spots for the ports and buttons? LED version too???[:D]
<center>http://www.dewbackwing.com/dewbacks/...inupbanner.jpg
www.dewbackwing.com</center>
Thanks for the help guys. Looking foward to the graflex blade holder.!!
yep, i might just have to get one and revamp the regular led holder i used in my real graflex led saber i just built. then i can reuse that old led holder in another hilt, maybe. hey tim, when they arrive post good pics of it. sounds real promising.[:D][:D][:D]
You dont know the POWER, of the dark side...