-
Dark Jedi Parts List
Hey all, This is my parts list for my soon to be saber. Everything will be JST clipped. Let me know if im missing anything:
Body:
v1 Hilt Style 4
v1 Blade Holder Style 23
v1 Pommel Style 4
Activation Box 14
Electronics:
Luxeon Tri-Rebel R/G/B
MHS Heatsink v3
18 deg Lens
Thermal Tape
3.7v Li-ion 3400mAh 18650 Batt Pack
PC Prizm Sound Board v3.5
PC Prizm v3.5 SD card
Premium Speaker
Switches:
16mm AV Latching Orange Dot
16mm AV Momentary Orange ring
Plugs:
MWS 2.1mm Power Jack
3.5mm R.I.C.E. Port style 2
Resistors:
2ohm 1 watt
.47ohm .5 watt x2
20mA Dynaohm Variable x2
Misc:
Kill Plug Style 5
Covertec Clip
MHS Speaker Mount v3
-
I'm not so sure that all that will fit inside the hilt. Especially with a lot of JST connectors.
-
Doesn't the Prizm v3.5 come with a microSD card pre-loaded with Light, Grey, and Dark Meat sound fonts? You might not need the extra card. :)
-
It may not seem like it, but those JST connectors eat up a lot of space. And from the look of your list you have a pretty short saber in the works. I'd definitely recommend adding some extensions or a choke, or possibly cutting back on your board/electronics intentions (and losing the JSTs). You're basically going to be cramming everything into about 6 inches worth of the hilt. Not that it can't be done with enough skill and patience, but avoid the headache if you can.
-
Im going to test it out first before I solder anything. I like a good challenge. Based off the info from the forums and the store, I drew up the inner diameter and the took the mesurement's from the board, speaker and JST plug I got for my cheapo PVC im building right now and kinda of diagramed it out. Im fairly certain I could do it but won't know for sure until I have the actual parts in front of me. Im looking to do it this way so when I buy future sabers I can switch the board in and out of the various sabers and save me some money.
-
And yes the sound boards do come with a card. I just miss read that one. Failbot activate.
-
Hahaha, I know what you mean. Looking forward to seeing this saber progress :)