The stock paint job and electronics left a lot to be desired on what really is a pretty good hilt for large people. My hand wraps around it just fine.
Printable View
The stock paint job and electronics left a lot to be desired on what really is a pretty good hilt for large people. My hand wraps around it just fine.
Hello,
Hilt SCC80 1 1/4 PVC, Grip 50mm medium wall heat shrink tube, T12 for the end cap. Coil .062 solder.
Electronics all TCSS TRI CREE BBW, Cool white for the internal. NBV4 28MM PREMIUM, guarded momentary sw.
Paint Krylon Fusion Nickle and satin black
Thanks and regards
Attachment 16189Attachment 16190Attachment 16191
US Aeonv4
NBv4
18650 3400mah
16mm counter sunk AV switch
TCSS MPS #6
28mm bass speaker
Running Dark Meat, Hoth and VadeR1
Attachment 16233
MHS Darth Nihilus with fixed chassis, NBV4, Crystal Chamber Reveal:
https://i.imgur.com/nVmg8lo.jpg
https://i.imgur.com/K5YAT3I.jpg
Running Annihilation in first 2 banks, and Necro in 3rd. White FOC.
Hi everyone
https://youtu.be/OqbXwHpi0hM
Nice work donpauleyboy! PVC shroud on sinkpipe?
Let me know if Works in Progress are not allowed and I'll take it down.
After a lot of sketching and fiddling I finally bought a bunch of MHS parts and played a bit. After some edits I think I have a direction I'm happy with. The paper mock ups are going to be used as templates to cut out sleeve material. Wish me luck with that, hehe
Attachment 17764
Works in progress are fine, as long as they don’t find their way into any contests, or anything.Quote:
Originally Posted by Alderscorn
i made my first saber hilt for Star Wars Celebration II in 2003. I sculpted in clay, made a casting in wax, and cast it in Aluminium. The hilt housed only a phono-jack with a side port to an external power source hidden in my sleeve. The blade was electro-luminescent ¾" blue tube.
https://live.staticflickr.com/7226/7...08a42747_z.jpg
Almost done with a complete overhaul of my 2004 Lightech Industries Viper Defender. It's finally ready for the guts. 11 pin Neopixel and CFX. Hilt is done.Attachment 17992Attachment 17993Attachment 17994
Thanks Tim for all of your help!