My saber wont turn off when i push the button into OFF position. Im using the modular wiring system. also, for some reason it will NOT unscrew at all, but it was working fine this morning. any help?
Printable View
My saber wont turn off when i push the button into OFF position. Im using the modular wiring system. also, for some reason it will NOT unscrew at all, but it was working fine this morning. any help?
This is just a guess. But it's possible you snagged a wire in the threading when you screwed it together. I've done this before myself. I finnally fixed it by twisting as hard as I could till it finnally unscrewed.
All I can say is good luck.
Be very careful. Using a lot of force WILL damage the threads if there is something between them.
The MWS will not turn off if the voltage is too low.. I hope to get this changed out for a better setup soon.
You can make a 4 wire buckpuck modular, I did, the first puck I used was a 6 wire, and I had the "not turning off" issue with a non illuminated AV switch
Here's a diagram of what I did:
http://farm8.staticflickr.com/7181/7...b9e3752459.jpg
You don't have to replace the buckpuck, you can just snip off the wires leading to the switch from the puck, and wire the remaining 4 this way.