MPP 2.0 parts list

Hi.

I have just purchased the Korbanth MPP 2.0 empty hilt to convert into a full LED white on clash ROTJ version. I have never built a saber before but am looking forward to the challenge but I need some help with the parts I need to start.

So far I have identified the following that I need.

MPP 2.0 Chassis
https://www.thecustomsabershop.com/M...?ItemId=506036

.875 OD sink module with center hole
https://www.thecustomsabershop.com/8...?ItemId=506494

7.4v Li-ion battery 2600mAh 18650
https://www.thecustomsabershop.com/7...?ItemId=506495

2W 28mm Bass Speaker
https://www.thecustomsabershop.com/2...?ItemId=506496

Nano Biscotte Sound Module V4
https://www.thecustomsabershop.com/N...Kits=850%2c964

18deg Tri-Rebel/Cree Star Lens
https://www.thecustomsabershop.com/1...?ItemId=506500

Custom Tri-Cree LED modified for the OD sink
https://www.thecustomsabershop.com/C...%2c1230%2c1168

Star thermal tape pad
https://www.thecustomsabershop.com/S...?ItemId=506503

Are these the correct parts to build a complete saber? Am I missing anything I need to add to this list? Also what recharge port is best for this model/chassis?

Any help and feedback would be greatly appreciated.

Thanks,

Mike