Printable View
According to the Store the Pico Crumble V2 should be use with a 3.7 V supply but the Manual says I can use 5V, I am working in building a voltage regulator so I can keep the 5V supply constant but I want to make sure I won't fry it as is meant on 3 V technology based on the product page.
Can I trust the manual over the product page?
The board can handle up to 5.5V per the manual. What would you want to use a voltage regulator with a sound board (that one in particular)?
I just want to use a 5.5V power supply or higher that I have around instead of getting a new one only for this, basically I want to be sure I can calculate everything in a 5V setup instead of recalculating everything for 3.7 V and lose power due to heat conversion.Quote:
Originally Posted by Forgetful Jedi Knight
Ideally, using a 3.7V battery would be better for you. If your converter somehow fails, you would also fry the board.
Thanks, will keep that in mind to see if is easier for me to build a fail save or get the correct power supply.Quote:
Originally Posted by Forgetful Jedi Knight