Printable View
Crystal Chamber V2. This time I ran a single 3/8” copper conduit under the natural quartz crystal. I’m going to paint the shroud . I wanted to secure both ends of the crystal so it could withstand some mild sparing. I used a NB-V4 sound card and a GGW Cree, rgb accent led, and 12mm led switch all from TCSS. The rest I made in my shop. Attachment 16774Attachment 16775Attachment 16776Attachment 16777Attachment 16778Attachment 16779Attachment 16780Attachment 16781
Thats a lovely pommel, you have some great machining skills. Very nice! I’m also wondering how the crystal chamber securing turns out, I really want a dueling lightsaber that has a crystal chamber. Will be watching this thread.
Awesome machining work. Why the "T" shaped cutout over crystal chamber in shroud? Decorative? Meaning? Just curious.
Tom
Nice work!
Seth... I will let you know...quartz is fairly strong and the epoxy should give it a bit of cushion....
Tom....
Decorative only...I was going to machine a decorative “grid” over the opening for the CC. As I was cutting I changed my mind. I just wanted to get a view in both dimensions and didn’t want it too symmetrical. Next time I’m going to cut out a larger hole in the shroud and make a removable plate with a grid. LOL... my designs are a bit fluid...I end up changing them all the time....
Nice job Gary. Looks great
Very Nice !!
Very nice work
I actually really like this one. Nice and simple but artistic at the same time as well =]