3 Attachment(s)
Basic Saber with LED and Nano Biscotti V3 Soundboard First Build
First saber build plus first post in forum... so yes, massive noob here, know nothing of electronics except what I've read on here and from YT tutorials.
I have followed this youtube tutorial on how to build it so far: https://www.youtube.com/watch?v=sApB7J5JdZ4. However, I was unable to find the same wiring harness as the one in the video so I decided to wire everything straight to the biscotti to what I think is accurate to the diagram attached. None of the functions are working.
The LED was working before I wired it to the biscotti so it can't be that because I tested it, which also means it can't be the battery. I have also attached some images of what I have soldered in case anyone can spot the problem (aside from the shoddy job of soldering).
Red wire: +led/+to battery
Light green wire: -to battery
Dark green wire: -led
white wires: Activation switch
Blue wires: speakers
Attachment 14586Attachment 14587Attachment 14588
Any help would be greatly appreciated.