So I'm looking at getting 2 of these to use as an act & aux switch, but there aren't any dimensions listed in the store so I don't know how tall they are...can anyone help?
http://www.thecustomsabershop.com/Bl...itch-P558.aspx
Thanx in advance
Printable View
So I'm looking at getting 2 of these to use as an act & aux switch, but there aren't any dimensions listed in the store so I don't know how tall they are...can anyone help?
http://www.thecustomsabershop.com/Bl...itch-P558.aspx
Thanx in advance
This is a rough guesstamate but it might be enough for your design plans. The last line in the description says:
That means the narrower threaded part just bellow the black plunger is 5 millimeters across with a 1/2 mm thread pitch. Using my chewed up elementary ruler on the monitor screen I estimated that the cylinder inside the saber will take up about a 10x10mm space, or roughly 0.4x0.4 inches. To get a much more accurate measurement I would suggest going into the store and clicking on the "contact us" button at the top of the screen. Hope this helped.Quote:
M5 x .5 threads