Wiring diagram check for NB, recharge port, illuminated AV switch, and accent led

so this may be a silly question but in this diagram would the kill switch be apart of this or would it be in a separate section?

Generally speaking, the recharge port IS the kill switch.

Unless you want to wire in a separate one. It just takes up more room though.

Yeah, what SS said. The recharge port is the kill switch. With the plug in the port, the circuit has no power.

NOW I KNOW (in Bill Nye the Science Guy voice)

And knowing is half the battle! GI JOEEEEEEE!

FYI, Red and Blue laser guns are the other half.

Quick question...
This is exactly what I need for my build without the accent LED and the recharge port. How would I take those out of the schematic to make it work?

Quote:

---

Originally Posted by WINN3BAG3L

Quick question...
This is exactly what I need for my build without the accent LED and the recharge port. How would I take those out of the schematic to make it work?

---

Erase the accent led and both leads up to where they meet the rest of the wiring.

Erase the charge port and the rightmost lead up to where it T's near the main LED.

Then, either install a toggle switch between the left two wires (manual kill switch) or connect them together.

Quote:

---

Originally Posted by GFJedi

Erase the accent led and both leads up to where they meet the rest of the wiring.

Erase the charge port and the rightmost lead up to where it T's near the main LED.

Then, either install a toggle switch between the left two wires (manual kill switch) or connect them together.

---

Yeah. If you use the 3.3v lead on the NB for an av switch led, you'll need a kill/toggle switch. It'll drain the battery otherwise.