rB/B/W LED vs rB/G/W LED

I’m looking to have 2 different color profiles in a NBv4. The first being a rich deeper blue and the second being an arctic blue. Both of these will be utilizing a white FoC. Which combination do you all think I should use? Also, if anybody has any recommended color values for these combinations I would greatly appreciate it.

Rb/G/W will give you a better Arctic Blue.

Thanks. Do you have any recommended color values for the rB/G/W to get a nice arctic blue?

Arctic blue is usually a mix of G/rB with about a 50/50 ratio I think. I personally sometimes put a little more green in it/drop the blue a little.

Now if you want a more ESB ice blue, you can run the white at max with the blue about 50%.

Quote:

---

Originally Posted by lovetadraw

Arctic blue is usually a mix of G/rB with about a 50/50 ratio I think. I personally sometimes put a little more green in it/drop the blue a little.

Now if you want a more ESB ice blue, you can run the white at max with the blue about 50%.

---

Sorry, for a late reply, but I just saw this post. Would you still be able to get a FoC with white max out like that?

You should, it’s easy enough to configure if you need to adjust the colors a bit.

Quote:

---

Originally Posted by Forgetful Jedi Knight

You should, it’s easy enough to configure if you need to adjust the colors a bit.

---

Thanks, Forgetful.