Printable View
Just finished this Polished Sithy Saber. I used 1.5” outside diameter 6061 aluminum with a 1.0” inside diameter. The Cree XP-E2 Tri-LED Red,Red,white...red chassis parts...switch...charge port and NB-V4 chip were sourced from the Custom Saber Shop TCSS. There isn’t much space in this hilt! Had to use the Cram-Fu to get it finished!
Attachment 16852Attachment 16853Attachment 16854Attachment 16855Attachment 16856
Shiny!!!! Very elegant too! I like it, especially that pommel. Did you do the machining yourself?
Oh yes. Very nice and very shiny. I like.
:mrgreen:
Yes...made everything except the parts I mentioned...Quote:
Originally Posted by Seth Skywalker
Nice work K6gad! I’m typing to make out the triangle is that a retention screw of sorts? The pommel does look nice, nice machine work.
Cram fu! Awesome saber K6!
Nice saber, and I’m going to echo some of the others here, really like the pommel.
Yes...it’s a blade retention screw, used the lathe to create the cylindrical part, end drilled and taped for an 8-32 screw.Quote:
Originally Posted by Jediseth
Then centered it in a chuck on a rotary table and milled with a flat end bit every 120 degrees to form an equilateral triangle on the top...
I dig it K6gad. Looks like the saber of fallen nobility. Like an alderaanian heirloom of the old sith.