Recessing a non-recessed switch hole.....advice needed
I have a hilt with a hole drilled for a 16mm switch but not recessed I want to use an illuminated momentary AV switch I can use a bezel but that raises the switch up just enough that I cant get the nut to thread onto the switch so I would need to glue it in (would prefer to avoid that) and as it is going to be the saber I duel with in The Saber Legion I would like the switch to be as low profile as possible so as to not disrupt my grip during sparing....
Is there a way i can cut the recess into the hilt? a forstner bit perhapse?
any recommendations would be greatly appriciated.....
https://scontent-ort2-2.xx.fbcdn.net...7c&oe=5B5DC0A3
https://scontent-ort2-2.xx.fbcdn.net...42&oe=5B59DB0Bn