Tried that setting change. No effect. Will upload a short video to aid in depicting issue soon.
Printable View
Here's a short video that may aid in troubleshooting, or at least better depict the issue.
http://youtu.be/Orl8gFSu4O4
Try deleting all colour profiles from the override file.
I suspect the colour profiles are overriding your settings (as designed) but without an aux button, you can not switch profiles. You could also just wire up an aux button to test.
Excellent!
If you are using channel 1 for main, and channel 2 for FoC... and If you have put your main LEDs in series...
This is what I would do;
Led=1000,0,0 fled=1000,1000,0 focmix111
In all sound bank config files.
Always delete the colour profiles from the override file when implementing a single colour setup like this.
Brilliant! Thanks!