-
Screws, check, easy, any drilling or anything like that required (obviously i will for the d clip but what about the blade retention screw?). Thanks heaps for your help. Actually what sort of screw do i need for the blade retention one.
http://www.thecustomsabershop.com/10...rew--P180.aspx
this one?
-
Read the 2nd paragraph in my edited post #8.
-
Sorry i missed that one.
Thanks heaps for all your help!
Sorry to pound with questions but will blade holder 17 (http://www.thecustomsabershop.com/Sc...e-17-P417.aspx) hold a blade well, it doesnt look like it has much to hold the blade in.
But thanks heaps for your help, i knew i would of missed something if i didnt ask.
-
I don't have any experience with that blade holder, but I can see why you ask that question. You'd have to have the blade retention screw on the short side, obviously.
-
I'll play it safe and go with 12. Thanks heaps for all your help, it's much appreciated.
-
-
First, don't worry about missing something with an order. It's gonna happen. Don't worry about putting things together and then realizing you don't like it or it's not quite functional. It's gonna happen. My input on any of the MHS products is that the owner of the store puts his parts together well. You don't have to worry about bad workmanship or poorly functioning pieces coming from Tim. He's been in the business for a while now and I'd bet a paycheck that he puts his stuff through the test before releasing them to us.
-
only sugestion i have it to use the MHS builder. that way you are only posting one link.