Couple projects I just finished, Dl-44 and ST prop
Hey guys, here are my two latest completed projects.
A video of both.
http://www.youtube.com/watch?v=2TmmCRi3bB8
First up is a TNG era klingon disruptor.
It started life as a solid resin model. I picked it up for 45.00 shipped off of ebay.
I used my mill to hollow out the main chamber for electronics. Then I drilled a hole from the thumb switch, to the electronics chamber.
Next I drilled out a hole for a recharge port.
I then installed the electronics from one of the new toy phasers. I replaced the cheap leds with a high output Seoul P4 red led.
I replaced the acrylic rods with aluminum ones that I turned myself. The central rod is hollow for the led wires.
Finally I painted the disruptor in the standard two tone color scheme.
I weathered it by dry brushing silver on the edges, and used a charcoal ink on the recessed areas.
Here are pictures.
http://img.photobucket.com/albums/v2...cture024-3.jpg
http://img.photobucket.com/albums/v2...cture023-3.jpg
http://img.photobucket.com/albums/v2...cture026-2.jpg
Next I have a dl-44 blaster
The base for this prop was an airsoft mouser with an all metal body. While not as screen accurate as a denix, it has the inside space I needed for electronics.
The flash hider I machined myself, the piston scope and scope mount were from Blast-tech.com
The speaker and batteries are in the mag well, the mag plate is held in pace with magnets, so changing batteries is a breeze.
It uses a soundboard from one of the hasbro toy blasters, and a high output seoul p4 led.
I painted the whole thing flat black, then used fine grit sandpaper on the raised areas to give it the weathered look.
Here are some pics
http://img.photobucket.com/albums/v2...Picture028.jpg
http://img.photobucket.com/albums/v2...Picture029.jpg
http://img.photobucket.com/albums/v2...Picture030.jpg
http://img.photobucket.com/albums/v2...Picture031.jpg
