Need Advice! New to the saber scene.
Ok, so I'm not all that new to the saber scene. I have read all the initial forums at least, and have constructed a stunt saber from sinktube materials (using basic ideas from the Big Yellow Box)and then replicated the hilt hopefully for LED electronics. But I am new to the LED saber idea and I just don't know if I will be able to use TCSS blades or electronics with my existing sinktube design. I'm concerned with where to put a blade retention screw and how to hold the Luxeon III/holder/heatsink in place above the switch. I think I have decided to buy the basic Luxeon III kit and just play around with it but I wanted to check and see if there was anything I wasn't thinking of that might make this tough for me.
I'll try and add a couple pics of my sinktube hilt as it is now by tomorrow so you can see my dilemma. The way my emitter is right now I really don't want a random screw up at the top and I don't want to have to alter the way that it fits in my hand. Any advice you could give would be welcome.