6 Attachment(s)
2 more sound sabers for Kiwanis
These are the last two sound sabers for our Kiwanis fundraiser this month. This is my first time using the TCSS sleeve material. It is thin walled and a challenge to machine. Clamping too tight in the vise distorts it and a large cutter chatters enough to move it in the vise. The trick is to pre-drill and use a small diameter milling bit, also take small amounts at a time. The front and rear curved areas were accomplished on the band saw and belt sander, using the top radius of the belt to get the curve section. It was a fun challenge.
Attachment 16519Attachment 16520Attachment 16521Attachment 16522Attachment 16523Attachment 16524