Civilized Weapons: Hagakure curved Jedi saber
I used a few design ques from some great people in our hobby, I looked to StrengthofRages Warlord for some design inspiration when I got stuck, VV for the idea to use clear acrylic in the bar graph opening and Madcows switch style. I know I'm probably forgetting someone/thing else though
I fit the recharge port, cf v5, bar graph and the switches in a 4 inch mhs extension. The elbow is a 45 degree sink joint, I hacked the connecting ends off and shortened the mhs adapters to fit in for the angle I liked. The bar graph is a 7 segment smd led graph and main led is a tri-rebel GGRb with the GG in series, and wow it is bright! The wrap is a rubberized type of tape, it is used in industrial applications and only sticks to itself. I wrapped the handle and then sealed it with several coats of clear. The powder coating is a color I got by combining a copper sating and a trans copper. The shield is salt water etched, all the shrouds are held in place by set screws from the inside for a cleaner look as well as the recharge port being threaded too.