Prizm v5.5 Neopixel Blade issues
Hello there!
So I was transforming my Prizm 5.5 from a dueling tri-cree LED to a neopixel as a show/practice blade. In an unfortunate turn of event, it's not as easy as I thought it would be.
Let's get some info in there first.
I'm using a 15 A 18650 battery from TCSS (and it's fully charged I triple checked).
The dat wire is not crossing close to power wires.
I put on the correct resistors where needed.
Additionally, this blade worked for a NBV4 build about a year ago.
https://imgur.com/aA1qwjd
That's the video with the blade doing it's thing. It's not a font issue because it does that with every font.
I'm just stumped. Any suggestions would be very helpful.
MTFBWY
EDIT: The current override file
## Override File
vol=3
beep=40
valsnd=0
deep=15000
muteoff=0
switch=2
offp=0
offd=200
gate=50
hclash=550
hswing=250
swing=200
clash=150
lockup=200
ledstrip=132
tridentstrip=0
ls0=14
ls1=28