RavenXp

unfortunatly no, the switchcraft style connector is designed to cut power to the electronics when the charging port in inserted, this looks like it...

We have a lot of the documentation for the proffie on the discord server, but to get you started here is where I recommend you get your basic proffie...

yep, should be good to go.

That is what I use by default in commissions that have the room for them. They are larger cells, 21mm diameter and 70mm long over 18mm diameter and...

doubtful that will provide the correct current, cells from that long ago usually had 5-8A current cutoffs on the protection PCB. you can try it, but...

It does look like you have what you need, aside from the proffieboard (TCSS now carries the v3.9 board which does have some advantages, but it does...

you are missing this, it holds the blade side PCB in the blade: https://www.thecustomsabershop.com/1-Thick-Walled-Pixel-Blade-Adapter-P1347.aspx ...

Polarity is so you can reverse the polarity of the pad from how it normally would. This way you can use the pads with either a common anode RGB LED...