garymorris

Then you’re all set in that regard.

I’m not sure that the 5.6 had sleep mode, or that you’ll be able to turn off the switch light when the saber isn’t running.

The CF 5.6’s take 7.4V. I don’t think the “voltage hack” worked on those.

I’d use the CF 5.6’s and wire red and blue in parallel, with a big resistor on the red. You want it to be about 400mA for a decent purple. That’s...

You would risk blowing the LED. I ALWAYS recommend getting the next highest one.

I would use 750 mA for Red, 1000mA for other colors.

No. The color extenders were specifically for CF v6 - v9. They aren’t for other boards. And the CFX doesn’t use it because it handles everything on...

The color extender was specifically designed for the CFv6 - v9. You’re not likely going to be able to mix colors with a board like that.

Hi. You will have to post pics of the saber. The last time I saw examined some of his hilts was about 5-ish years ago. The main problem is that the...