Power/ led problems
by
, 01-29-2013 at 01:06 PM (4123 Views)
Hi all
I've built a few sabers with no problems, until now ! I've built a Luke
ROTJ bottom half master replicas, top half custom build, thin neck.
I tested with a three aaa battery pack, Luke board, 3w green led,
No problems. I then changed the power to a 4.8 four AA nmh pack
And after a few minutes the led flickers. When I put the lower power
Pack in its fine. Is it a led heatsink problem ?
I'll try and upload pics of my sabers when I work out how !
Thanks for any help