My shroud / layering work improved some, and I was finally able to produce something that was far from perfect but at least slightly above the "acceptable" threshold. [ATTACH=CONFIG]10886[/ATTACH] The shroud work is not polished. Also, some of the bands close to the emitter are etched--not with any design but to yield some texture. This unpolished texture is complemented by the unpolished outer layer.
Originally Posted by Celticblood NOW my complete LED STRING in the TCSS 1"OD 3/4"ID 1/8" walled Polycarbonate tube 40" long. It s work, but don t now if it s will look good... Not yet . But what can i say it that i have few hours searching how make it to have a FoC and don't blend the LED from Lame and search a wiring solution to have it AROUND and not only on one side http://<a href="http://youtu.be/uZKG...ZKGjQvUKKU</a>
Originally Posted by Celticblood Well that the finaly first step . The wire what i don t have understand his fonction is NOT a (+) and not a (-). For this reason i take it a new colour.
Originally Posted by jedirobe77 I purchased a tri rebel ggw. How do I find out which color each die is?
http://youtu.be/_5w5ufP0hPA http://youtu.be/CkoCAlkRL3U http://youtu.be/cwGDuZxXskA
Archive
Recent Comments