View Full Version : Green LED pics
01-30-2006, 10:05 PM
Post pictures with Green LED's only please.
The Custom Saber Shop
02-01-2006, 11:56 PM
http://darth.smugmug.com/photos/50946891-M.jpg http://darth.smugmug.com/photos/50946909-M.jpg3watt & TCSS diffuser
03-11-2006, 09:08 PM
Luke ROTJ Green Luxeon with TCSS Diffuser Blade ( Made by Hajime )
" Mind like Water "
03-13-2006, 08:46 AM
This is a 1 watt Luxeon led with 5 degree optics with a Hasbro sound board and a luxdrive micropuck on the the output of the Hasbro sound board driving the LED at 3 volts with TCSS diffuser in a ploy-c blade
Don't make me destroy you...
05-13-2006, 03:52 PM
1W Luxeon Green
08-05-2006, 03:31 PM
Hi greetings from Peru. These are pictures of my first saber. Cyan led and three clear celophane sheets as difuser
Here with the second one and the MR led string ones
Here with Artoo
03-11-2007, 07:07 PM
Luxeon III 3 watt emitter led, no optics, 14mm side-emitting fiber optic cable for diffuser.
05-11-2007, 09:43 AM
Luxeon 1500mah K2, direct-drive from an MR Vader S/B:
09-21-2007, 09:08 AM
Green Lux III, direct drive off an MR Luke soundboard, 1" thin-wall blade with a double-wrap of Corbin film, and a full (8 feet) of Ultrafilm as well:
Camera settings altered to make blade appear as true to life as possible.
09-21-2007, 09:29 AM
Green lux 3 also, on/off latching switch with 9 volt direct power with resistor and a thick walled blade with single wrap of corbin film and the shouldered tip with 3/4 mirror.
09-26-2007, 12:56 AM
The saber in my signature is a green Luxeon V at 1 amp :)
10-18-2007, 10:49 PM
Green Lux V driven off the Ultrasound with a 7.2V battery pack. It has a double wrap of Corbin Film in it.
10-18-2007, 10:50 PM
A green Lux I driven with a micropuck next to my green Lux III pictured above:
12-24-2007, 11:55 AM
LEFT: Green Bin 2 Lux V Resistored on 7.2V Li-Ion Pack
RIGHT: Green Bin 3 Lux III IN Converted MR Anakin. (low batts)
01-19-2008, 08:58 PM
Green K2 powered with 4AAA NiMH through a resistor.
1" thick wall blade with 4 wraps of Corbin's film and about 6' of cellophane inside of that. Blade was sanded with 320 grit sandpaper.
01-21-2008, 04:08 PM
First saber, MHS with K2 led driven by a 1000 ma buckpuck or whatever puck was an option with the BIY K2 kit, Last is a thin-walled Ultrablade.
Saber turned on in well lit in the area
Saber on in darkened room
01-25-2008, 06:17 PM
lux 3 green led with ultrasabers mid grade stunt blade. oh and i think the green is also from ultrasabers because if i recall i took this led from one of their stunt sabers that they offered on ebay once. I may be wrong so don't hold me to it.
04-13-2008, 02:35 PM
Green Bin 3 Lux III with puck and an Ultrablade
05-05-2008, 01:26 PM
Green K2 running off MR Jedi soundboard with 4 AAA
pic taken with no flash
06-08-2008, 12:22 PM
12-11-2008, 08:21 PM
First pic. so here it ishttp://i730.photobucket.com/albums/ww309/CountMalik/Brentslightsaber003.jpg (http://i730.photobucket.com/albums/ww309/CountMalik/Brentslightsaber003.jpg)
enjoy! Green k2 (don't have it anymore though.) BTW this is MHS w/ ultra mid-grade stunt blade
01-22-2009, 09:38 AM
This is my Lux III Green
and here is is next to my Cyan Dominix:
01-23-2009, 01:47 AM
Just finished this one. Lux 3 kit.
01-28-2009, 03:21 AM
My contribution - Yoda sink tube that I made for a coworker's 8 year old son (green P4).
I've also included a comparison photo with the output from my green K2 at the end. You can tell a slight color difference which is more pronounced in the blade - the P4 does indeed have a slightly more blueish hue to it and the K2 has a more yellowish hue. Personally, I think I actually like the P4 more now than the K2.
lights off, -1 exposure setting so it's actually quite close to real life
comparison of P4 (left) and K2 (right)
01-29-2009, 06:12 PM
Lux V Green, USv2.0 soundboard, 7.2V Trustfire Li-ion Rechargeable, lighted room
Also pictured: Lux III Cyan BIN 2 Twin Saber Prototype (USv2)
04-13-2009, 07:56 AM
Seoul P4 Green
1000ma buck puck
See the saber's main thread here (http://forums.thecustomsabershop.com/showthread.php?t=7834)
04-19-2009, 08:08 PM
Alright, I swapped our my LUX3 for a shiny new P4...here are the pics.
I placed them next to my Ultrasabers Dominix for comparison. I have one in Cyan and one in Orange. The pictures were taken during the day, lights off, windows covered (not very well).
04-27-2009, 07:49 PM
TCSS ROTJ Luke DIY Kit with bin1 lux 3
06-23-2009, 07:26 AM
Just wired the basic Lux 3 set up, no sound run directly off the battery.
05-22-2010, 03:23 PM
mr luke rotj custom, p4 green, 1000ma buckpuck 4 wire driver, 4aa battery pack
Don't have the saber finished yet, but tested the wiring on the LED the other night, and thought I'd share this:
A friend thought I was Arc-welding
Luxeon Rebel Star driven by 1000 mA buckpuck (though it measures to 850 mA with a multimeter) with a 2010 Hasbro sound board. First two pics are a darkened room (curtains drawn, but not completely dark). The third is in full daylight. In daylight, the core effect of the Corbin blade reaches the end, but it is not completely green at the far end. The actual color in the darkened room is more of an emerald green than the pastel you see here.
06-16-2011, 06:06 AM
p4 Green run at 1.5A from a cf v4.3 using a tcss trans white blade and 8.7 degree optics
11-10-2011, 07:38 AM
Here is my green saber ^^ 6137
Powered by vBulletin® Version 4.2.2 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.