PDA

View Full Version : Question about the quickchange



shiky
05-19-2006, 03:52 PM
Hey i searched the thread index and the rest of the forum for this and i couldnt find it anywhere, so i need to know... When using the quickchange kit, do you need to buy a new lens and collimator for each LED? or can you use the same one? i want to take advantage of the firebird birthday discount, but dont know if i need the lens and collimator for the second led.

A Jedi feels the Force flowing through him..

Firebird21
05-19-2006, 03:53 PM
No you shouldn't.
The lens only sits on the LED it does not attach to it.
You'l just swap out the Heat-synk with the LED attached, rather than disconecting the LED from the H/S which could end up damaging the LED, or the Plastic screws.

Edit: But you could get a spare. One 5* and one 10* to see which one you like better...



Have you read your Thread Index (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=577) today?
FAQ (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=552)
http://www.gaownersclub.com/forum/images/smilies/icon_sabre.gif http://www.clicksmilies.com/s0105/auto/car-smiley-032.gif Official Designated TCSS Jester! http://www.gaownersclub.com/forum/images/smilies/icon_biggrinjackbox.gif

shiky
05-19-2006, 04:03 PM
so the heatsink comes with the emitter? do i have to order a second heatsink? does it come with the LED? god i'm so confused lol. Help me firebird, you're my only hope.

A Jedi feels the Force flowing through him..

Firebird21
05-19-2006, 04:07 PM
I don't think the new emitters come with the H/S, but I may be wrong...

The H/S does not come with the LED.

What are you trying to order? I can tell you what you'll need to get.

Have you read your Thread Index (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=577) today?
FAQ (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=552)
http://www.gaownersclub.com/forum/images/smilies/icon_sabre.gif http://www.clicksmilies.com/s0105/auto/car-smiley-032.gif Official Designated TCSS Jester! http://www.gaownersclub.com/forum/images/smilies/icon_biggrinjackbox.gif

shiky
05-19-2006, 04:14 PM
well i order the MHS yesterday, with emitter #4 i believe, the slotted one J-Lo got. Got it with a blue LED. since you've graced us with ten percent off, i wanted to get a green one to quickchange with. In my cart currently is the LED, another quick connect cable and the new covertech but that has nothing to do with.

A Jedi feels the Force flowing through him..

Firebird21
05-19-2006, 04:17 PM
That sounds like all you'll need.

The Quick Change Kit and the new LED.

Have you read your Thread Index (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=577) today?
FAQ (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=552)
http://www.gaownersclub.com/forum/images/smilies/icon_sabre.gif http://www.clicksmilies.com/s0105/auto/car-smiley-032.gif Official Designated TCSS Jester! http://www.gaownersclub.com/forum/images/smilies/icon_biggrinjackbox.gif

Strydur
05-19-2006, 04:25 PM
I know I wasnt clear on the pictures..All LED blade holders come with a heatsink..white screws..allen wrench.

Tim
The Custom Saber Shop

Firebird21
05-19-2006, 04:26 PM
Told you I could be wrong! lol

Have you read your Thread Index (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=577) today?
FAQ (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=552)
http://www.gaownersclub.com/forum/images/smilies/icon_sabre.gif http://www.clicksmilies.com/s0105/auto/car-smiley-032.gif Official Designated TCSS Jester! http://www.gaownersclub.com/forum/images/smilies/icon_biggrinjackbox.gif

NooB1Kenobi
05-19-2006, 06:11 PM
LOL! I just asked Strydur about the LED holder earlier.. I was wondering If I needed to add it to my cart or not..

<div align="left"><center>http://i59.photobucket.com/albums/g292/TheNooB1/05c362a5.jpg</center></div id="left">

<center><font color="red">Female Twi'leks are so Hot! I want one. Gotta love the lekku =0)~</font id="red"></center>