Shadar Al'Niende
11-14-2009, 09:34 PM
Hey guys.!
after designing, and re-designing, and re-designing, and...well you get the point ;) I am planning on ordering this coming Friday and have that feeling that I HAVE to be missing something... I am sure you all know the feeling.
The Goal is to have a Green Lux V driven by a US 2.5, wired with a recharge port, Illuminated Green AV Momentary switch, reverse sound and a crystal in the pommel. (I think that is the high points) This will be a show piece, thus no covertec pieces or D-Ring.
Ok, ok... enough of that, I know some of this is not in stock currently but....on with the parts...
BH 17
Custom Choke 3
7" Fluted DF Extension (drilled for recharge port, AV, and button head screw)
Pommel 6
MPS Insert 1
1-1/2" x 12" Chrome sink tube
8-32 x 13/32 Black Thumb Screw
8-32 x 1/2" black button head screw
Acrylic Crystals
Bezel for illuminated switches
3/32" Allen wrench
2AA Battery holder
TrustFire Protected 18650 Li-Ion's (2-pack)
2.1mm Power Jack
Power jack kill plug
3.7V-14.8V Li-Ion Smart charger
2.1mm plug adapter for smart charger
Ultrasound 2.5
Premium Speaker
4 Wire Quick Connector (x2)
26 Guage Wire Black (2ft)
26 Guage Wire Red (2ft)
1/8" Heatshrink Tubing
LED "Corbin style" Show blade
16mm Green Illuminated AV Momentary
Luxeon V (Green)
10 deg Lens
Lens Holder
5mm Green Accent LED's (x3)
Like I said, i have this nagging feeling that I am missing something. As stated earlier, I am sure you have all gone through that, so a good once over would be much appreciated :D Here is a peek at the general concept:
http://i187.photobucket.com/albums/x116/TaiDashan/TCSS%20Renders/Lamnia-Verus.png
after designing, and re-designing, and re-designing, and...well you get the point ;) I am planning on ordering this coming Friday and have that feeling that I HAVE to be missing something... I am sure you all know the feeling.
The Goal is to have a Green Lux V driven by a US 2.5, wired with a recharge port, Illuminated Green AV Momentary switch, reverse sound and a crystal in the pommel. (I think that is the high points) This will be a show piece, thus no covertec pieces or D-Ring.
Ok, ok... enough of that, I know some of this is not in stock currently but....on with the parts...
BH 17
Custom Choke 3
7" Fluted DF Extension (drilled for recharge port, AV, and button head screw)
Pommel 6
MPS Insert 1
1-1/2" x 12" Chrome sink tube
8-32 x 13/32 Black Thumb Screw
8-32 x 1/2" black button head screw
Acrylic Crystals
Bezel for illuminated switches
3/32" Allen wrench
2AA Battery holder
TrustFire Protected 18650 Li-Ion's (2-pack)
2.1mm Power Jack
Power jack kill plug
3.7V-14.8V Li-Ion Smart charger
2.1mm plug adapter for smart charger
Ultrasound 2.5
Premium Speaker
4 Wire Quick Connector (x2)
26 Guage Wire Black (2ft)
26 Guage Wire Red (2ft)
1/8" Heatshrink Tubing
LED "Corbin style" Show blade
16mm Green Illuminated AV Momentary
Luxeon V (Green)
10 deg Lens
Lens Holder
5mm Green Accent LED's (x3)
Like I said, i have this nagging feeling that I am missing something. As stated earlier, I am sure you have all gone through that, so a good once over would be much appreciated :D Here is a peek at the general concept:
http://i187.photobucket.com/albums/x116/TaiDashan/TCSS%20Renders/Lamnia-Verus.png