Darth Abominor
10-26-2009, 01:08 PM
Hi all. This is the first MHS build I have ever attempted and my 4th saber to date. The others are all sink sabers, but I figured it was time to just bite down and get the MHS system and see what it can offer.
The hilt is a simple 4 section unit (body #2 standard hole, emitter #4, pom #4, and choke #1-short)
Sorry, bad lighting at the time I was hitting pics. Seems even in the 41st millenia, there's still not enough light without a flash. :roll:
Everto Interfecta - The Deamon Slayer:
http://lasersportsusa.com/images/lightsabers/everto_interfecta.jpg
Emitter Close Up:
http://lasersportsusa.com/images/lightsabers/ei_emitter_close.jpg
Switch w/ Nut Close Up:
http://lasersportsusa.com/images/lightsabers/ei_switch_close.jpg
Hilt in Full:
http://lasersportsusa.com/images/lightsabers/ei_emitter_full.jpg
Saber Full:
http://lasersportsusa.com/images/lightsabers/ei_full.jpg
She's just the basic, bare bones slaughter machine at the moment, with a P4 Red TCSS LED (showing a bit orange in the pics), a basic TCSS resistor hookup, 5* lens, running off of 4AA 1.2v 2600 rechargers. The blade is a standard 1/8in SaberForge, with his usual lathe worked outer edge. I'll be working on the shroud as soon as I have an image in mind that works with something along the theme of this saber build.
The hilt is a simple 4 section unit (body #2 standard hole, emitter #4, pom #4, and choke #1-short)
Sorry, bad lighting at the time I was hitting pics. Seems even in the 41st millenia, there's still not enough light without a flash. :roll:
Everto Interfecta - The Deamon Slayer:
http://lasersportsusa.com/images/lightsabers/everto_interfecta.jpg
Emitter Close Up:
http://lasersportsusa.com/images/lightsabers/ei_emitter_close.jpg
Switch w/ Nut Close Up:
http://lasersportsusa.com/images/lightsabers/ei_switch_close.jpg
Hilt in Full:
http://lasersportsusa.com/images/lightsabers/ei_emitter_full.jpg
Saber Full:
http://lasersportsusa.com/images/lightsabers/ei_full.jpg
She's just the basic, bare bones slaughter machine at the moment, with a P4 Red TCSS LED (showing a bit orange in the pics), a basic TCSS resistor hookup, 5* lens, running off of 4AA 1.2v 2600 rechargers. The blade is a standard 1/8in SaberForge, with his usual lathe worked outer edge. I'll be working on the shroud as soon as I have an image in mind that works with something along the theme of this saber build.