PDA

View Full Version : No clash sensor??


P137R0
10-20-2009, 10:18 AM
What happens when you don't have a clash sensor on a MR soundboard?
Does the scrolling effects and the idle hum work fine without it?
or does the board not work at all without it?
cardcollector
10-20-2009, 11:19 AM
well, it won't clash...:)

but everything else will work fine.;)
Jedi-Loreen
10-20-2009, 11:25 AM
That would be kind of sad not to have the clash sounds, especially if it's a Jedi board.



With a Sith board......maybe not so much. :p
Sunrider
10-20-2009, 11:30 AM
If the switch broke put another one on.:p To look one up i think they are called momentary inertia switches.
Lord Maul
10-20-2009, 02:48 PM
If the switch broke put another one on.:p To look one up i think they are called momentary inertia switches.

To be more specific, they are SW-18020P clash sensors... The MR ones are Yusan, but that is a universal part number. You can only buy them in batches of like 1000 though, so it's a moot point.
P137R0
10-20-2009, 06:27 PM
is there an inexpensive way to replace the clash sensor?
Jedi-Loreen
10-20-2009, 06:54 PM
Buy a cheap Hasbro toy saber (with sound, of course) and take it from there. People do it all the time.

I'm surprised nobody suggested it here.
Sunrider
10-20-2009, 06:57 PM
http://www.newark.com/jsp/displayProduct.jsp?sku=13J4326&CMP=KNC-G10000679&HBX_OU=50&HBX_PK=ASLS2

This looks like it could work. Compare specs to the original.

Searched google for axial lead shock switch accelerometer sensor.:p
Paar Ad
10-25-2009, 04:54 PM
:idea: the lack of a clash sensor might be convenient in a spinning saber. Every time i see somebody spinning they stop their saber too quickly, triggering the clash. It kinda ruins the effect